top of page

 SECURITY LAMINATED

 

SECURITY LAMINATED GLASS CAN BE MADE USING MULTIPLE LAYERS OF GLASS AND LAMINATES.  BULLET RESISTANT GLASS CAN BE FABRICATED IN MANY DIFFERENT CONFIGURATIONS.  THE MOST POPULAR IN THE UNITED STATES ARE AS FOLLOW

 

 

  • CLASS 1     .38 SPECIAL HANDGUN                   1 3/16" = 1/4 1/4 1/4 1/4 1/8                                                                        15 LBS/SQ FT

  • CLASS 2     .357 MAGNUM HANDGUN              1 1/2"  = 1/4 3/8 1/4 1/4 1/8                                                                         17 LBS/SQ FT

  • CLASS 3     .44 HANDGUN                                   1 3/4" = 1/4 3/8 3/8 1/4 1/4 1/8                                                                   21 LBS/SQ FT

  • CLASS 4     30.06 HIGH POWER RIFLE               2 1/2" = 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 + 1/8 HEAT STRENGTHENED   29 LBS/SQ FT

 

TYPICAL MARKETS ARE :  GAS STATIONS                        GOVERMENT BUILDINGS                    CHECK CASHING STORES

                                             POLICE STATIONS                  PAWN SHOPS                                        JAILS/PRISONS

                                             TOLL BOOTHS                        LIQUOR STORES                                   BANKS

                                             AIRPORTS                                RECRUITING OFFICES                          ARMORED CARS

 

 

RESIPOUR LAMINATED

 

THE GLASSLAM SYSTEM IS A CHEMICALLY CURE POLYESTER POLYMER WHICH CHEMICALLY BONDS TO THE GLASS AND CURES TO MAKE A STRONG, FLEXIBLE INTERLAYER.  OUR LAMINATE IS AVAILABLE EITHER IN TEMPERED OR ANNEALED WITH AN INTERLAYER THAT IS .030 OR .060 THAT CAN BE A CLEAR INTERLAYER OR TINTED INTERLAYER THAT IS OPAQUE OR TRANSLUCENT.

 

WE USE THREE LIQUID RESIN COMPONENTS, MIXED TOGETHER AND POURED OR PUMPED IN BETWEEN AT LEAST TWO LAYERS OF GLASS.  BY USING THIS STATE OF THE ART TECHNOLOGY, ALL TYPES OF GLASS CAN BE LAMINATED.  THE THREE COMPONENT RESIN PROVIDES A MUCH BETTER ADHESION TO THE GLASS AND BECAUSE ON OF THE COMPONENTS IS SILICONE BASED.  THIS SYSTEM IS COMPLETELY COMPATIBLE WITH SILICONE GLAZING SYSTEMS.

 

TEMPER LAMINATED CAN NOT BE FABRICATED WITH POLISHED EDGES OR HOLES.  ALL LAMINATED WILL HAVE A BLACK TAPE APPROXIMATELY 3/8 IN ON ALL SIDES.  ONLY ANNEALLED LAMINATED CAN HAVE TAPE CUT OFF SO WE CAN POLISH AND HOLE DRILL.

LAMINATED CAN BE MADE TO ANY THICKNESS YOU REQUIRE.

 

                      

LAMINATED COLORS

bottom of page